Denon AVR-1803 Operating Instructions Manual page 12

ENGLISH
Setting the speaker distance
Input the distances from the listening position to the speakers and set the surround
delay time.
Preparations:
Measure the distances from the listening position to the speakers (L
on the diagram at the right).
L : Distance from center speaker to listening position
1
L : Distance from front speakers/subwoofer to listening position
2
L : Distance from surround speakers to listening position
3
L : Distance from surround back speakers to listening position
4
CAUTION:
Set the center speaker at the same distance from the front speakers (left and right) or the subwoofer, or so
that the difference in distance (L – L ) is 1.5 meters or less.
2 1
Set the surround speakers (left and right) at the same distance from the front speakers (left and right) or the
subwoofer, or so that the difference in distance (L
Set the surround back speaker at the same distance from the front speakers (left and right) or the
subwoofer, or so that the difference in distance (L
1
Use the
speakers and subwoofer to the listening position.
• The number changes in units of 0.1 meter each time one of the buttons is
pressed. Select the value closest to the measured distance.
("/SW" appears only when subwoofer = yes.)
Press the ENTER or
NOTE:
• The speaker distance can be adjusted between 0 and 18 meters in steps of 0.1 meter.
2
Use the
speaker to the listening position.
• The number changes in units of 0.1 meter each time one of the buttons is
pressed. Select the value closest to the measured distance.
Press the ENTER or
setting.
NOTE:
• No setting when "None" has been selected for the center speaker.
3
Use the
speakers to the listening position.
• The number changes in units of 0.1 meter each time one of the buttons is
pressed. Select the value closest to the measured distance.
Press the ENTER or
setting.
NOTE:
• No setting when "None" has been selected for the surround speakers.
12
FL
to L
1 3
Subwoofer
SL
– L ) is 4.5 meters or less.
2 3
– L ) is 4.5 meters or less.
2 4
(left) and (right) buttons to set the distance from the front
8 FRNT/SW 3.6m
(down) button to switch to the center speaker setting.
(left) and (right) buttons to set the distance from the center
9 CENTER 3.6m
(down) button to switch to the surround speakers
(left) and (right) buttons to set the distance from the surround
10 SURR. 3.0m
(down) button to switch to the surround back speaker
4
Center FR
L L
1 Listening
2
position
L
2
L
3
L
4
SR
SB
NOTE:
• No setting when "None" has been selected for the surround back speakers.
Setting the Digital In Assignment
Input the type of components connected to the digital input terminals.
1
12 COAX
2
13 OPT1
3
14 OPT2
Use the (left) and (right) buttons to set the distance from the surround
back speakers to the listening position.
11 S.BACK 3.0m
• The number changes in units of 0.1 meter each time one of the buttons is
pressed. Select the value closest to the measured distance.
Press the ENTER or (down) button to enter the setting and switch the
DIGITAL input (COAX) setting.
Use the (left) and (right) buttons to assign the input function connected
to the COAXIAL input (COAXIAL) terminal.
(Initial)
CD DVD TV VCR1
CD
(left) button
• Select "OFF" if nothing is connected.
Press the ENTER or (down) button to switch the optical input 1 (OPT 1)
setting.
Use the (left) and (right) buttons to assign the input function connected
to the OPTICAL input 1 (OPT 1) terminal.
(Initial)
CD DVD TV VCR1
DVD
(left) button
• Select "OFF" if nothing is connected.
Press the ENTER or (down) button to switch the OPTICAL input 2 (OPT 2)
setting.
Use the (left) and (right) buttons to assign the input function connected
to the OPTICAL input 2 (OPT 2) terminal.
(Initial)
CD DVD TV VCR1
TV
(left) button
• Select "OFF" if nothing is connected.
Press the ENTER or (down) button to switch the OPTICAL input 3 (OPT 3)
setting.
VCR2 TAPE OFF
(right) button
VCR2 TAPE OFF
(right) button
VCR2 TAPE OFF
(right) button