GE 19 Use And Care Manual page 20

Note:
Door swing on models with
Take-out Center cannot
be reversed.
Important: Once you begin, do not move cabinet until door-swing reversal is completed.
These instructions are for changing the
hinges from the right side to the left side.
If you ever want to change the hinges back to the
right side, follow these same instructions (merely
reverse all references to left and right).
GENERAL
a. Unplug the reti-igerator from its electrical
outlet.
b. Empty all door shelves, including the dairy
compartment.
REMOVE FREEZER DOOR.
a.
Tape door shut with masking tape.
e. Set door on non-scratching
surface with outside up.
20
TOOLS REQUIRED
Phillips screwdriver
T20 Torxdriver
. 3/81' socket and ratchet* thin-blade screwdriver
(a 6-point socket is recommended)
REMOVE THE DOORS
a. Tape door shut with
masking tape.
b. Remove the hinge
pin with a 3/81' socket
and ratchet.
c. Remove tape and tilt
door away from cabinet.
Remove and save washer
on hinge pin.
d. Lift door straight
up to free its bottom
socket from pin in bottom
hinge bracket.
Caution: Do not let either door drop to the
floor. To do so could damage the door stop.
* You may also use an open end adjustable wrench.
When reversing the door swing:
Read the instructions all the way
through before starting.
. Handle parts carefully to avoid
scratching paint.
screws down by their related parts
Set
to avoid using them in the wrong places.
Provide a non-scratching work surface
for the doors.
. Masking tape
. Putty knife or
REMOVE FRESH
HINGE
CENTER
HINGE s
BRACKET
-
FOOD DOOR.
PLASTIC WASHEh
I
i
PIN
'
I
FRESH FOOD DOOR
–