Install Drain Hose; Water Supply Line - Maytag MDB6709AWW Installation Instructions Manual

Route water supply line
3
4 Flush water supply line
5
Slide nut and ferrule
onto tubing
Copper tubing only: Slide nut, then ferrule, about 1"
(2.5 cm) onto copper tubing.
NOTE: To avoid vibration during operation, route the
water supply line so that it does not touch the
dishwasher base, frame or motor.
Add 90° elbow fitting to the
6

water supply line

Connect the
line prior to installing the unit into the cabinet opening.
Attach such that the
Copper tubing only: Put the tubing into the 90° elbow
fitting as far as it will go (the copper tubing bends and
kinks easily). Slide the nut and ferrule forward and start
the nut onto the elbow threads.
Flexible braided connection: Secure nut to elbow using
" open ended wrench or adjustable wrench.
NOTE: Do not use Teflon
fittings.

Install Drain Hose

1 Drill hole
Nut
2 Route drain hose
Ferrule
" compression fitting to the water supply
" connection is facing upward.
®† tape with compression
Drain hose
"
1
(3.8 cm)