One-Touch Storage - AT&T 1070 Quick Start Manual

PROGRAM
(ENTER NUMBER)
PAUSE

One-touch storage

For more information about using the display
screen menus, see the Menu operation section of
your installation guide.
Use the following steps to program the one-touch
keys.
1. Press [ENTER]. The screen displays ONE
TOUCH.
Press [ENTER].
.
. Press [ ] or [ ] repeatedly until you see
PROGRAM.
4. Press [ENTER]. The screen includes (ENTER
NUMBER).
5. Use the dial pad to enter up to 4 digits.
• To copy the most recently dialed number
from redial, press [(AUTO) REDIAL]. Only the
last number dialed from this extension can
be copied to a one-touch location. The other
numbers on the redial list cannot be copied
to a one-touch location.
• To erase the last digit, press [ ] to scroll to
DELETE CHAR, then press [ENTER].
-OR-
Press [REMOVE].
• To cancel programming, scroll to CANCEL
and then press [ENTER].
. Press the desired one-touch key to store the
telephone number in the normal location.
-OR-
Press [LOWER], then the desired one-touch
key to store the telephone number in the lower
location.
14