One-Touch Storage - AT&T 1080 User Manual

PROGRAM
(ENTER NUMBER)
PAUSE
One-touch setup and operation

One-touch storage

Use the following steps to program the one-touch
keys.
1. Press [ENTER]. The screen displays ONE TOUCH.
2. Press [ENTER].
3. Press [ ] or [ ] repeatedly until you see
PROGRAM.
4. Press [ENTER]. The screen includes (ENTER
NUMBER).
5. Use the dial pad to enter up to 24 digits.
-OR-
• To copy the most recently dialed number
from redial, press [(AUTO) REDIAL]. You can
copy only the last number dialed from this
extension to a one-touch location. You cannot
copy the other numbers in the redial shack.
• If you need to store a two-second dialing
pause for accessing banking or long distance
services, press [ ] or [ ], scroll to PAUSE,
then press [ENTER]. A P appears on the
screen.
• If you need to store a signal for switching
to temporary tone dialing, press [ ] or [ ]
until you see TONE, then press [ENTER]. A T
appears on the screen.
• If you need to store a flash signal for using
the service supplied by your telephone
company, press [ ] or [ ] until you see
FLASH, then press [ENTER]. An F appears on
the screen.
• To erase the last digit, press [ ] to scroll to
DELETE CHAR, then press [ENTER].
-OR-
Press [REMOVE].
• To cancel programming, scroll to CANCEL
and then press [ENTER].
36
Continued on next page