Removing The Rear Cover; Installing The Rear Cover - Barco NH-12 Service Manual

4. Covers
Introduction
The rear cover mainly protects the lamp and the cold mirror.
4.3.1

Removing the rear cover

Necessary tools
Philips Ph2
How to remove the rear cover?
1. Remove the fixing screw
Image 4-9
Rear cover: fixing screw
2. Lift the back side of the rear cover and pull it backward to remove it
Image 4-10
Tilt the back side of the rear cover
4.3.2

Installing the rear cover

Necessary tools
Philip screwdriver Ph2
How to install the rear cover?
1. Put both clamps of the rear cover in the holes on the top cover
Tip: The rear cover must be tilted to perform this step!
18
Image 4-11
Pull the rear cover backward
Image 4-12
Rear cover removed
R59770158 NH-12 20/02/2008