Installing The Folding Mirror Cover; Engine Fan Cover - Barco NH-12 Service Manual

4. Covers
Image 4-35
Folding mirror cover removed
4.6.2

Installing the folding mirror cover

Necessary tools
Phillips screwdriver Ph1
How to install the folding mirror cover?
The procedure to install the folding mirror cover is similar to the procedure to install the lamp start cover. See the concerning
chapter for a detailed drawing.
1. Put the cover — slightly tilted — in the right position (see 1 and 2 on image 4-30)
2. Slide the bottom feet of the cover in their slots by lifting the cover (see 3 on image 4-30)
3. Tilt the cover until it is in almost vertical position (see 4 on image 4-30 )
4. Slide the cover towards the front side of the projector to lock the feet (see 5 on image 4-30)
5. Tilt the cover until it closes the folding mirror housing (see 6 on image 4-30)
6. Use two screws to fix the cover
Image 4-36
Folding mirror cover: fixing screws
4.7

Engine fan cover

Overview
• Description of the engine fan covers
• Removing engine fan cover 1
• Installing the engine fan cover 1
• Removing engine fan cover 2
• Installing the engine fan cover 2
26 R59770158 NH-12 20/02/2008