[Separate Scan] - Muratec MFX-C2280 Fax Manual

Settings
[Frame Erase]
[Center Erase]

[Separate Scan]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Separate Scan]
If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can
load them in several batches and handle them as one job.
You can also perform scanning of the original by switching between the ADF and the Original Glass as need-
ed.
d
Reference
For details on serial scanning, refer to page 3-22.
Description of Setup Buttons
Description
Erases the shadow of the surrounding that is created when the original
cover cannot be closed properly due to the thickness of the original.
You can erase the four sides of the original to the same width. Additionally,
you can erase the four sides of the original to different widths.
• [Frame]: Select this option to erase the four sides of the original to the
same width. In [Erase Amount], tap [+]/[-] for the inch area, or tap [+]/[-
] or press the keypad for the centimeter area to specify the width of the
area to be erased.
• [Individual]: Select this option to erase the four sides of the original by
specifying different widths for different sides. Select a side ([Top], [Bot-
tom], [Left] or [Right]) specify the width of the area to be deleted for
each side in [Erase Amount] by tapping [+]/[-] for an inch area and by
tapping [+]/[-] or pressing the keypad for a centimeter area.
If you do not want to erase the side, cancel the setting for [Erase].
Erases the shadow created in the center when the original cover cannot be
closed properly due to the thickness of the original.
Specify the width of the area to erase by tapping [+]/[-] for the inch area, or
by tapping [+]/[-] or pressing the keypad for the centimeter area.
9
9-15