DURKOPP ADLER 969 ECO Operating Manual page 30

28
3. Important: Adjust the height of the tube (1) according to the
illustration, so that it projects 10 to 15 mm above the thread
bobbin.
4. Turn the tube so that the opening in the tube (4) faces the
thread guide (3).
5. Tighten the nut (5).
6. Feed the thread into the tube (1), through the opening (4),
through the thread guide (3) and into the opening on the pre-
tensioner (2).
Fig. 11: Threading hook thread
①
②
(1) - Cutter
(2) - Thread guide
7. Guide thread through tensioner (3).
8. Guide thread through thread guide (2).
9. Press the thread onto the tensioner (3) by hand, move the end
of it underneath the cutter (1) and cut it by pulling it against
the blade of the cutter (1).
(3) - Tensioner
Operating manual 969 - 00.0 - 08/2014
Operation
③