Using The Standard Bin And Paper Stop; Loading Trays - Lexmark MS310d Quick Refence Manual

• The smallest Universal size supported in the multipurpose feeder is 76 x 127 mm (3 x 5 inches). The smallest
Universal size supported in the optional tray is 183 x 210 mm (7.2 x 8.3 inches).
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
2
Click Settings > Paper Menu > Universal Setup.
3
Select the unit of measure, or click Portrait Width or Portrait Height.
4
Change the setting, and then click Submit.
Using the printer settings on the computer
1
Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or Printer
Settings.
2
Select the tray containing the Universal paper size, and then select Universal as the paper size.

Using the standard bin and paper stop

The standard bin holds up to 150 sheets of 75‑g/m
a paper stop that keeps paper from sliding out the front of the bin as it stacks.
To open the paper stop, pull it so that it flips forward.
Note: Close the paper stop when moving the printer to another location.

Loading trays

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Pull out the tray completely.
2
(20‑lb) paper. It collects prints facedown. The standard bin includes
11