Lexmark MS310d Quick Refence Manual page 63

‑ On
‑ On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then press
twice quickly to see the supplemental light sequence.
‑ On
‑ Blinking
‑ On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of
the following:
•
From the printer control panel, press
•
Unplug the router, then wait for 30 seconds, and then plug the router back again.
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server. For more information, visit the Lexmark Web site at
http://support.lexmark.com.
to continue printing.
63