Muratec MFX-C2828 User Manual page 117

7.1 Restricting users of this machine (MFP authentication)
Item
[Account Name]
[Password is
changed.]
[Password]
[Retype Password]
[Temporarily stop
use]
[Output Permis-
sion(Print)]
[Output Permis-
sion(TX)]
[Max. Allowance
Set]
Reference
- You cannot register a password less than eight characters when [Security Settings] ö [Security Details]
ö [Password Rules] is set to [Enable] in the [Administrator Settings] on the Control Panel. If a user
password containing less than eight characters has already been registered, change the password so
that it contains eight characters before setting [Password Rules] to [Enable].
- By default, the sheets printed in the single color or 2 color mode are counted as being printed in color.
To restrict use of the color printing or color image transmission functions, you can change this behavior
to treat printing in the single color or 2 color mode as monochrome printing if necessary. For details,
refer to page 10-40.
Description
Enter an account name (up to 8 characters, excluding
space and ").
Select this check box to change the password.
This item is displayed when editing the registered informa-
tion.
Enter a password (up to 8 characters, excluding space
and ").
Re-enter the password (up to 8 characters).
Select whether to temporarily disable a registered ac-
count. This item is available when temporarily disabling
registered accounts without deleting them.
If you select [Stop Job], the target account cannot log in
to or use this machine. If you disable an account regis-
tered as a user's account name, users who belong to the
disabled account also cannot log in to this machine.
Select whether to allow color or black printing.
Select whether to allow the user to send color images.
Specify the maximum numbers of printed sheets and User
Boxes.
To specify the limit, select the appropriate check box and
enter the desired limit value.
7
Prior check
7-9