Tcp/Ip Settings]; Lpd Setting]; Raw Port Number] - Muratec MFX-C2828 User Manual

5.1 Printing (LPR/Port9100)
5 Printing
5.1 Printing (LPR/Port9100)
Configure settings for LPR or Port9100 printing.
LPR printing is performed via the network using the LPR protocol. It is mainly used in UNIX-based operating
systems.
Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a destination printer.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.

[LPD Setting]

d
Reference
For details on how to install the printer driver, refer to the [User's Guide Print Operations].
5.1.1

[TCP/IP Settings]

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
5.1.2 [LPD Setting]
In the administrator mode of Web Connection, select [Network] ö [TCP/IP Setting] ö [TCP/IP Setting].
Item
[LPD]
5.1.3

[RAW Port Number]

In the administrator mode of Web Connection, select [Network] ö [TCP/IP Setting] ö [TCP/IP Setting].
Item
[RAW Port
Number]
Reference
- If you select [OK] after changing multiple port numbers together in Web Connection or on the Control
Panel, a port number duplication error may be displayed. When this error is displayed, first change one
port number and select [OK]. Then change another one and select [OK].
(1) LPR printing
(2) Port9100 printing
(1)
Description
Select [Enable].
Description
Select the check box of the required port, and enter the
RAW port number.
[TCP/IP Settings]
Finish
5
(2)
[RAW Port Number]
Prior check
Prior check
5-2