If You Cannot Make Copies As You Want - Ricoh MP 2001L Operating Instructions Manual

If You Cannot Make Copies As You Want

This section explains causes and remedies when copy results are not as expected.
Basic
Problem
You cannot combine several
functions.
Edit
Problem
When using the Duplex Margin
function, parts of the original
image are not copied.
Combine
Problem
When using Combine, parts of
the image are not copied.
Causes
Selected functions cannot be
used together.
Causes
You set a wide erased margin.
There is a lack of margin space
on the opposite side of the
binding position.
Causes
You specified a reproduction
ratio that does not match the
sizes of your originals and copy
paper.
Your originals are not identical
in size and direction.
If You Cannot Make Copies As You Want
Solutions
Check the combination of
functions and make the settings
again.
• page 105 "Combination
Chart"
Solutions
Set a narrower margin with
User Tools. You can set the
width between 0–50 mm (0"–
2"). See page 92 "Duplex
Margin".
Solutions
When you specify a
reproduction ratio using the
Manual Paper Select function,
make sure the ratio matches
your originals and the copy
paper.
• Select the correct
reproduction ratio before
using the Combine
function.
Use originals that are identical
in size and direction.
75