If You Cannot Make Clear Copies - Ricoh MP 2001L Operating Instructions Manual

If You Cannot Make Clear Copies

Problem
Copies appear dirty.
The reverse side of an original
image is copied.
A shadow appears on copies if
you use pasted originals.
The same copy area is dirty
whenever making copies.
Copies are too light.
Parts of the paper are not
copied.
Causes
Image density is too dark.
Image density is too dark.
Image density is too dark.
The exposure glass or ADF is
dirty.
Image density is too light.
A light copy may result when
you use damp or rough grain
paper.
Toner bottle is almost empty.
The original is not placed
correctly.
An improper paper size is
selected.
If You Cannot Make Clear Copies
Solutions
Adjust the image density. See
page 48 "Adjusting Image
Density".
Adjust the image density. See
page 48 "Adjusting Image
Density".
Adjust the image density. See
page 48 "Adjusting Image
Density".
Change the orientation of the
original.
Put mending tape over the
pasted areas.
Clean them. See page 103
"Maintaining Your Machine".
Adjust the image density. See
page 48 "Adjusting Image
Density".
• Use the recommended
paper.
• Use paper that has been
stored in the recommended
temperature and humidity
conditions.
See "Copy Paper", General
Settings Guide.
Add toner. See page 83
"Adding Toner".
Place originals correctly. See
page 31 "Placing Originals".
Select the proper paper size.
73