If You Cannot Make Copies As You Want - Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual

IF YOU CANNOT MAKE COPIES AS YOU WANT

IF YOU CANNOT MAKE COPIES AS YOU
Problem
Copies appear dirty.
The reverse side of an
original image is copied.
Copies are too light.
The same copy area is
dirty whenever making
copies.
Copies are blank or
parts of the image are
not copied.
Copies have white
streaks.
If you cannot correct the problem by taking the above actions, please contact
your service representative.
48
Cause
The original has a gray or
colored background.
The image density is too dark.
The platen cover, exposure
glass, or document feeder belt
is dirty.
The image density is too dark.
The original has a low
contrast image.
The image density is too light.
Damp or rough grain paper is
used.
The platen cover, exposure
glass, or document feeder
belt is dirty.
The original is not set correctly.
An improper paper size is
selected.
The corona wire is dirty.
KF2Jr-AE-7
WANT
Action
Adjust the image density.
See page 28.
Clean them.
See pages 70 and 71.
Adjust the image density.
See page 28.
Adjust the image density.
See page 28.
Use dry paper without rough
grain.
Clean them.
See pages 70 and 71.
Set originals correctly.
See page 19, 20, or 22.
Select the proper paper size.
Clean the corona wire.
See page 71.