If You Cannot Make Copies As You Want - Ricoh FT2012+ Operating Instructions Manual

IF YOU CANNOT MAKE COPIES AS YOU WANT

IF YOU CANNOT MAKE COPIES AS YOU
Problem
Copies appear
dirty.
The reverse side
of an original im-
age is copied.
Copies are too
light.
The same copy
area is dirty when-
ever making cop-
ies.
Copies are blank
or parts of the im-
age are not cop-
ied.
If you cannot correct the problem by taking the above actions, contact your
service representative.
28
Cause
The original has a gray or
colored background.
The image density is too
dark.
The platen cover or
exposure glass is dirty.
The image density is too
dark.
The original has a low
contrast image.
The image density is too
light.
Damp or rough grain paper
is used.
The platen cover, exposure
glass or mirror is dirty.
The original is not set
correctly.
An improper paper size is
selected.
WANT
Action
Adjust the image
density. See
page 18.
Clean them.
See page 58.
Adjust the image
density. See
page 18.
Adjust the image
density. See
page 18.
Use dry paper
without rough
grain.
Clean them.
See page 58 and
63.
Set originals
correctly. See
page 10.
Select the proper
paper size.