Entering The Supervisor Level; Defining New Local Users - Avaya P333R-LB Installation And Configuration Manual

Chapter 8 User Authentication
user account are established using the username command.
Switching between the entities, does not effect the security level since security levels
are established specifically for each user. For example, if the operator with a
privileged security level in the Switch entity switches to the Router entity the
privileged security level is retained.
Note: If you wish to increase security, you can change the default user accounts and
SNMP communities.
Note: The Web management passwords are the same as those of the CLI. If you
change the passwords of the CLI then those passwords become active for Web
management as well.

Entering the Supervisor Level

The Supervisor level is the level in which you first enter P330 CLI and establish user
names for up to 10 local users. When you enter the Supervisor level, you are asked
for a Login name. Type root as the Login name and the default password root
(in lowercase letters):
Welcome to P330
Login: root
Password:****
Password accepted.
Cajun_P330-N(super)#

Defining new local users

Define new users and access levels using the following command in Supervisor
Level.
In order to...
Add a local user account and
configure a user (name, password
and access level)
To remove a local user account
40
Use the following command...
username
no username
Avaya P333R-LB User's Guide