Agency Approval; Mtbf; X330Gt2 Gigabit Ethernet Expansion Module; Atm Expansion Modules - Avaya P333R-LB Installation And Configuration Manual

Chapter 3

Agency Approval

The transceivers comply with:
• EMC Emission: US – FCC Part 15, Subpart B, Class A;
Europe – EN55022 class A
• Immunity: EN50082-1
• Safety: UL for US UL 1950 Std., C-UL (UL for Canada) C22.2 No.950 Std., Food
and Drug Administration (FDA) 21 CFR 1040.10 and 1040.11, and CE for
Europe EN60950 Std. Complies with EN 60825-1.

MTBF

The Mean Time Between Failures (MTBF) for the X330G2 Expansion Sub-module is
594,639 hours.

X330GT2 Gigabit Ethernet Expansion Module

The X330GT2 Expansion Module provides two copper Gigabit Ethernet 1000Base-T
ports.
Note: The X330GT2 module is only supported by Avaya P330 embedded software
versions 2.4 and higher.

ATM Expansion Modules

There are two Avaya P330 ATM Expansion Modules:
• X330-OC12F1:
• X330-OC12S1:
The ATM Modules can be installed in the following Avaya P330 Family switches:
• Avaya P333T Hardware Version C/S 1.3 and higher, with Embedded S/W 2.4
and higher.
Note: The ATM Expansion Module cannot be used in Avaya P333T hardware
Versions lower than C/S 1.3.
• Avaya P334T Embedded S/W Ver. 2.4 and higher.
• Avaya P332MF Embedded S/W Ver. 3.0 and higher.
• Avaya P333R Embedded S/W Ver. 2.4 and higher.
Refer to the Avaya X330 ATM Access Module Installation Guide for installation
procedures.
The multimode Avaya X330-OC12F1 and X330-OC3F1 (future) ATM Modules are
Class 1 LED products. The single-mode X330-OC12S1 ATM Module is a Class 1
14
500m, Multimode fiber, can also be OC-3 reduced range
15 km, Single-mode fiber, can also be OC-3
Avaya P333R-LB User's Guide