When Memory Is Full - Ricoh DSm616 Operating Instructions Manual

Troubleshooting

When Memory Is Full

Messages
Memory is full. [Print] scanned
orig., [Clear] to cancel/clear
memory.
[Clear][Print]
Note
❒ Copying will stop and this message will be
3
displayed when the memory is full.
Reset * orig., then press
[Resume] to scan and copy the re-
maining originals.
[Stop] [Resume]
38
Causes Solutions
The scanned original Press [Print] to copy
exceeds the number scanned originals
of pages that can be and cancel the scan-
stored in memory. ning data. Press
[Clear] to cancel the
scanning data and
not copy.
The machine checks To continue copying,
if the remaining orig- remove all copies,
inals should be cop- and then press
ied, after the scanned [Resume]. To stop
original has been copying, press [Stop].
printed.