The View Administration Option - Avaya 4600 Series Administrator's Manual

The View Administration Option

If you are using static addressing and encounter problems, use this procedure to verify the
current values of system parameters and file versions.
Note:
Also use the ADDR option to view IP Addresses covered in "Static Addressing
Note:
Installation" in Chapter 3 of 4600 Series IP Telephone Installation Guide. IP
Addresses might have been entered incorrectly. Verify whether you were
provided with correct IP Addresses.
If PROCPSWD is administered as indicated in
you must type the Local Procedure password after pressing Mute, and before
pressing V I E W.
The 4601 IP Telephone does not support static addressing, and therefore does
not support the V I E W command.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate
of the telephone:
Mute 8 4 3 9 # (Mute V I E W #)
Note:
Press the Mute button momentarily. Do not press this key while pressing other
Note:
keys. The 4630 IP Telephone does not have a dedicated Hold button. For all
other 4600 Series IP Telephones, pressing the Hold button instead of the Mute
button also works.
The following text displays left-justified at the top of the display:
View settings
*=next
2. Press the * button at any time during viewing to display the next name and system value
pair from Table
Press the # button at any time during viewing to terminate the procedure and restore the
user interface to its previous state.
The names and values display in the order shown in
#=exit
11. The first pair displays again after the last pair displays.
The View Administration Option
Chapter 4: Server Administration,
Table 11.
Issue 2.2 April 2005 111