Changing Your Password; Answering A Call; Answering A Second Call; Making Calls - 3Com 3101 Manual

Changing Your
Password

Answering a Call

Answering a
Second Call

Making Calls

You must use the Telephone User Interface (TUI) and change the local
password to match the password stored on the call processor by
following these steps:
1 Press Program + 5 + 5 or press Feature 410 + 5 + 5.
The Display Panel shows:
Enter Password:
2 Enter your new password and press #. The first digit of the password
cannot be zero (0). The minimum password length is 4 digits; the
maximum password length is 9 digits.
To answer an incoming call, lift the handset.
Alternatively, if you are using a 3Com 3101SP Basic Telephone, you can
press the speaker button.
If your telephone includes multiple access lines, press the Access button
for the line on which the new call is arriving (the light next to the button
will be flashing).
Unanswered calls are sent to either your call coverage point which, by
default, is your voice mailbox or your configured call forwarding
destination. See Call
When a new call arrives while you are on a call:
1 Press Hold to put the current call on hold.
2 Press the Access button for the line whose status light is blinking,
indicating a new call.
3 To return to the earlier call, hang up the new call, or put it on hold, or
transfer it, and then press the Access button for the original call.
This section describes standard dialing features.
Forwarding.
Answering a Call 21