Connecting The Telephone To The 3Com Asterisk Appliance - 3Com 3101 Manual

Connecting the
Telephone to the
3Com Asterisk
Appliance

Connecting the Telephone to the 3Com Asterisk Appliance

The underside of an telephone includes:
1 AC power adapter connection
2 Ethernet connector for connection to the LAN
3 Ethernet connector for an optional connection to your desktop computer.
4 Handset connector
5 Headset connector (not available on 3Com Basic telephones)
6 Tabs for the support bracket
For information about the underside of each telephone, and for
information about how to connect any telephone to a Power over
Ethernet source, see the packing sheet that comes with the device.
Strain relief clamps are built into the support bracket.
Connect your telephone to power and to the LAN as described in
Connecting the Telephone.
Your Asterisk administrator must assign you a user account that includes
your telephone extension and your username and password. Before the
telephone can connect to the 3Com Asterisk Appliance, it must have
these IP configuration settings defined:
The telephone IP address
■
The subnet mask of your local network
■
A default gateway IP address
■
The IP address of the 3Com Asterisk Appliance and the IP address of
■
the download server
If your network is configured to use DHCP, the telephone receives its IP
configuration automatically. Otherwise, you must configure your
telephone manually for network and 3Com Asterisk Appliance
connectivity.
47