Changing Your Password - 3Com VCX V7000 Telephone Manual

If the password you entered is associated with the phone extension, you
are logged in.
If the Display Panel alternately shows the following information, the
password you entered is not associated with the phone extension or the
extension has not yet been assigned to the phone:
In this case, use the following steps to log in to your phone:
1 Press the bottom right soft button (Advanced Settings) + 4.
The Display Panel shows:
2 Enter your extension and press #.
If the Display Panel shows a previously assigned number that you want to
replace, press the Delete button under the Display Panel to move the
cursor back one space. Repeat as necessary and then enter your
extension and press #.
The Display Panel shows:
3 Enter your password and press #.
Alternatively to set a password locally, you can use the Password Stored
Locally feature code (434) by entering the bottom right soft button
(Advanced Settings) + 5, then enter the password. You can use this
method in place of step 1 above. See
feature codes.
Changing Your You can change your password through the VCX User Interface (see
Password Chapter
However, your password is also stored locally on your telephone.
Changing your password through the VCX User Interface does not
change the password stored on the phone. You must use the Telephone
Invalid number/password:
Then:
Unable to contact PBX
Logged out from PBX
Local Phone Number:
Enter Password:
6). This changes your password on the VCX call processor.
Logging In to Your Telephone
Chapter 4 for information on
27