Power On And Off; Language Setting; Initial Settings; Scanning Unit (Scan Head) - Sharp AL-2060 Operation Manual

POWER ON AND OFF

The power switch is located on the left side of the machine.
Caution
Power on
Turn the power switch to the "ON" position.
You can select copy settings and press the [START] key (
switch is turned on. Copying will start automatically.
Caution

Language setting

The first time the power is turned on after shipment from the factory, a message will
appear in English in the display asking you to select the language. Select the
language with the [
The language can also be changed in the user programs (p.65).

Initial settings

The machine reverts to the initial settings when it is first turned on, when the [CLEAR
ALL] key (
CLEAR" time following the end of a copy job. When the machine reverts to the initial
settings, all settings and functions selected to that point are canceled. The "AUTO
CLEAR" can be changed in the user programs. (p.62)
When in the copy mode
Copy ratio: 100%, Exposure: Automatic
Copy quantity: 0, All special copier modes: Off

Scanning unit (scan head)

When the machine is able to copy or scan (the ready indicator is on), the scanning
unit is lit.
16
If you use the machine in a country other than the country
where the machine was purchased, you will need to make sure
that your local power supply is compatible with your model. If
you plug the machine into an incompatible power supply,
irreparable damage to the machine will result.
Only insert the power cord into a properly grounded wall socket.
Do not use extension cords or power strips.
] key ( ) or [
) is pressed, or when no keys are pressed for the preset "AUTO
The ready indicator will light up and other
indicators which show the initial settings of the
display will also light up to indicate the ready
condition. For the initial settings, see the
"Initial settings" (below).
] key ( ) and then press the [OK] key.
) after the power