Sharp AL-2060 Operation Manual page 65

Program
Program name
number
AUTO SHUT-OFF
4
TIME
7 LAYOUT IN 2IN1
OFFSET
8
FUNCTION
ROTATE ORIG.
9
IMAGE
AE/TEXT
10
RESOLUTION
2-SIDED COPY
11
MODE
Setting codes
(factory default
setting appears
in bold)
• This function automatically
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
• Use this setting to select the
1: PATTERN 1
2: PATTERN 2
• When enabled, this function
1: ON
2: OFF
• When two-sided copying is
1: ON
2: OFF
• This setting is used to change
1: 300dpi
2: 600dpi
• If the memory fills up when
1: HI-SPEED
2: NORMAL
USER SETTINGS
Explanation
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when
the power is on. All lights except
the power save indicator go off.
To resume normal operation,
press the [START] key (
Normal operation also resumes
automatically when a print job is
received or scanning is begun
from a computer. While in auto
power shut-off mode, no keys
(except the [START] key (
can be used.
layout pattern when two
original pages are copied onto
a single sheet of paper (see
page 35 for the layout
patterns).
offsets the position in the
paper output tray of sets of
copies during copy job, and
print jobs when using the
printer function.
performed, this function rotates
the image on the back of the
original. This is convenient
when binding the copies at the
top (tablet binding).
the copy resolution in AUTO
and TEXT mode from 600 x
300 dpi to 600 x 600 dpi (high-
quality mode). Scanning is
slower when high-quality
mode is used.
two-sided copying is
performed, "NORMAL" can be
selected to make copying
possible. However,
"NORMAL" results in a slower
copying speed. Normally "HI-
SPEED" is selected to enable
fast two-sided copying.
).
))
7
63