Changing Batteries - Windsor Chariot 3 iScrub 26 CS26 Operating Instructions Manual

Hide thumbs Also See for Chariot 3 iScrub 26 CS26:
Table of Contents

Advertisement

Maintenance

Changing Batteries

Stop the machine in a clean area next to the charger.
Turn off machine.
FOR SAFETY: Before leaving or servicing the
machine; stop on level surface, turn off machine
and remove key.
1. Remove the rear cover.
2. Disconnect battery pack from machine.
3. Unlatch battery tray from machine and pull out to
expose batteries.
4. Use the proper size open end wrench to discon-
nect main ground wire first and secure cable
terminal away from batteries.
5. Disconnect main positive lead and secure cable
terminals away from batteries.
6. Loosen both terminals on each jumper cable and
remove one at a time.
7. Prepare a suitable site to place the batteries.
Attach suitable battery lifting device and lift
batteries from the machine. Batteries are a
potential environmental hazard. Consult your
battery supplier for safe disposal methods.
Fixez le dispositif de levage de batterie approprié et
levez les batteries de la machine. Les batteries
constituent un danger potentiel pour l'environne-
ment. Consultez le fournisseur de votre batterie
pour connaître les méthodes d'élimination sûres.
RED
RED
+
-
BLK
BLK
REAR OF MACHINE
32
RED
+
+
-
-
BLK
86395370 Operator Manual - Chariot 3 iScrub 26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents