Table Of Contents; Symbols - Festool TI 15 Instruction Manual

Contents
Symbols................................................
Safety instructions ...............................
Technical data ......................................
Functional description .........................
Intended use.........................................
Operation..............................................
Settings ................................................
Tool holder, attachments .....................
Working with the machine ...................
Service and maintenance.....................
Accessories ..........................................
Disposal................................................
Transport ..............................................
Warranty ...............................................

Symbols

V volts
W watts
A amperes
Hz hertz
~ alternating current
direct current
d.c.
n no load speed
0
Class II Construction
.../min revolutions or reciprocation per minute
-1
min
h hour
General safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
6
min
s
6
kg
6
9
9
10
°C
10
Nm
11
mm
12
Ah
15
Wh
15
16
Warning of general danger
17
17
Risk of electric shock
17
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Max. chuck clamping
RBRC Seal - LiIon
Operating mode Impact screw driver
Operating mode Screwing/Drilling without
impact
Safety instructions
1 WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
minutes
seconds
kilograms
diameter
tip, hint
degree centigrade
Newton metre
millimetre
amps hour
watt hour
delay fuse with 4 amps