Assembling The Fan - Hunter Ernest Hemingway Series Owner's Manual

Step 5-3:
5-3. Partially attach each blade assembly to the fan with
two blade iron screws. When all blades are attached
and properly spaced, securely tighten all screws.
5 • Assembling the Fan
Blade
Hardware Needed:
Screw
Blade
Blade Screw
74510-27-247
Blade
(x 15)
Iron
Hardware Needed:
Upper
Switch
Housing
Upper Switch
Housing Screw
74506-54-247
(x 2)
42746-01 • 04/26/07 • Hunter® Fan Company
Steps 5-1 - 5-2:
Note: You may rest the fan body in the
carton for protection and stability during
this time.
5-1. Remove the blade iron screws and shipping
blocks from the fan motor. Save the screws
and discard the shipping blocks.
5-2. Align the holes in the blade with the holes in
the blade iron and attach with three blade
screws. Securely tighten the screws.
Blade
Screw
Step 5-4:
5-4. Unbundle the wires from the fan. Thread
the wires from the fan through the hole
in the upper switch housing. Attach the
upper switch housing to the fan using two
screws.

Step Title
Hardware Needed:
Iron
Blade Iron
Screw
63755-06-247
(x 10)