Hunter Ernest Hemingway Series Owner's Manual page 7

3-5. With the assembly still on its side, install the
third foot into the base with the provided
screw. (The first two have been preinstalled.)
When the final foot has been installed, tilt the
assembly back to its upright position.
Step 3-6:
3-6. Note: The spindle is optional. The fan can be installed with only the
spindle cover.
Holding the grommet in place, slide the spindle (optional) and
spindle cover onto the lower pole. Lower the spindle and spindle
cover to rest on the base cover.
Middle
Pole
Section
Power
Cord
3 • Assembling the Base
Without
Spindle
Hardware Needed:
Pole Screw
06549-01-247
(x 3)
42746-01 • 04/26/07 • Hunter® Fan Company
Hardware Needed:
Foot Screw
74510-27-247
(x 1)
With
Spindle
Base
Stand
3-7. Thread the power cord through the middle pole
section. Attach the middle pole section to the lower
pole section. Align the holes and securely install three
screws to stabilize.

Step Title
Step 3-5:
Foot
Foot
Screw
Preinstalled feet
Spindle
Grommet
Spindle
Step 3-7:
Cover
Base
Cover