Getting Ready - Hunter Ernest Hemingway Series Owner's Manual

Step Title
ATTENTION:
This fan must be assembled by
three or more people. Do not
attempt to assemble this fan
without assistance.
This fan weighs approximately
150 lbs.
Assembling Multiple Fans?
If you are assembling more than
one fan, keep the fan blades and
blade irons in sets, as they were
shipped.
1 • Getting Ready
To assemble this fan, be sure each person can do the following:
• Connect electrical wires.
• Lift 50 pounds.
If you need help installing the fan, your Hemingway by Hunter® fan
dealer can direct you to a licensed installer or electrician.
Gathering the Tools
You will need the following tools for assembling the fan:
• Standard screwdriver
• Phillips-head screwdriver
• Allen Wrench (included)
• 7/16" Wrench or pliers
Checking Your Fan Parts
Carefully unpack your fan to avoid damage to the fan parts. Refer
to the Parts Guide Sheet included in the carton. Check for any
shipping damage to the motor or fan blades. If any parts are missing
or damaged, contact your Hunter® dealer or call Hunter® Technical
Support Department at 888-830-1326.

42746-01 • 04/26/07 • Hunter® Fan Company