Operating And Cleaning Your Fan - Hunter Ernest Hemingway Series Owner's Manual

Step Title
Step 8-1:
Note: If you are not installing the light kit, skip step 8-1.
8-1. Insert a glass shade into a fitter and tighten the
thumbscrews. Repeat for all shades. Install three A-19
medium base 60 Watt max light bulbs.
Completed Assembly
8 • Operating and Cleaning Your Fan
8-2. Install the plastic plugs into the remaining holes in the pole. If you
chose not to install the table, you will need to install all the included
plugs.
8-3. Plug the fan into an electrical outlet.
8-4. The fan pull chain controls power to the fan.
The pull chain has four settings in sequence: High,
Medium, Low and Off.
•
•
recoiling into the blades.
87"
8-5. The light pull chain controls power to the light.
•
8-6. This fan operates in a downdraft direction only by blowing air
downward (counterclockwise blade rotation) to cool the area with a
direct breeze.
Note: Do not use a water hose or pressure washer to clean
this fan.
8-7. For cleaning finishes, use a soft brush or lint-free cloth to prevent
scratching. A vacuum cleaner brush nozzle can remove heavier dust.
Remove surface smudges or accumulated dirt and dust using a mild
detergent and a slightly dampened cloth. You may use an artistic
agent, but never abrasive cleaning agents as they will damage the
finish.
42746-01 • 04/26/07 • Hunter® Fan Company
Pull the chain slowly to change settings.
Release slowly to prevent the chain from
Pull the chain slowly to change settings.
1
Glass
Shade
Bulb