Installing The System Cover - Dell PowerEdge M830 Owner's Manual

Installing the system cover

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Remove the system cover.
NOTE: You must remove the system cover to service other components inside the system.
3. Ensure that no tools or parts are left inside the server module.
Steps
1. Align the alignment guide on the system cover with the alignment guide on the chassis.
2. Lower the cover onto the chassis.
3. Slide the cover until it clicks into position.
A properly seated cover is flush with the surface of the chassis.
Next steps
Follow the procedure listed in
Related Links
Removing the system cover
Installing a server module
Safety instructions.
After working inside your system.
41