Figure 35. Removing and installing a 2.5 inch (x2) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD
backplane
1.
hard drive/SSD backplane
3.
guide pin (5)
5.
hard-drive/SSD backplane cable
connector
7.
PCIe SSD backplane cable connector
9.
hard-drive/SSD backplane cable
Next steps
1.
Install the hard drive/SSD backplane.
Related Links
Installing a 2.5 inch (x2) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD backplane
Removing a server module
Removing the system cover
2.
release latch (2)
4.
connector on the system board
(SATA_BP)
6.
connector on the system board
(J_PERC)
8.
PCIe SSD backplane cable
95