System Cover Removal - Dell PowerVault 715N Service Manual

To replace the bezel, push the levers inward and push the bezel onto the front of the system.
System Cover
The system has a cover that provides access to system board components and the PCI expansion card. To service the
system, remove the cover to gain access to internal components.

System Cover Removal

CAUTION: See the safety instructions in your System Information booklet before working inside your
system.
1. Push the latches on the top of the system inward (see
2. Slide the system cover backward about 16 mm (0.6 inch) until the embossed arrowheads on the sides of the cover
and chassis are aligned (see
3. Carefully lift the cover away from the system.
Figure 2. System Cover Removal
Figure 2).
1 Cover
2 Latches (2)
3 Arrowheads aligned for
Figure 2).
removal