Table of Contents
Advertisement
Figure 15. Removing the system cover
1.
latch release lock
3.
system cover
Next steps
1.
Install the system cover.
Related Links
Safety instructions
Removing the optional front bezel
Installing the system cover
Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Ensure that all internal cables are connected and placed out of the way and no tools or extra parts
are left inside the system.
Steps
1.
Align the slots on the system cover with the tabs on the chassis.
2.
Push the system cover latch down to move the system cover into the closed position.
The system cover slides forward and the tabs on the system cover engage with the slots on the
chassis. The system cover latch locks into place when the system cover engages with the slots on
the chassis.
3.
Rotate the latch release lock clockwise to the locked position.
2.
latch
69
Advertisement
Table of Contents
Troubleshooting
