Dell PowerEdge M830 Owner's Manual page 62

a bootable file on the USB memory key, see the user documentation that accompanied the USB memory
key.
Replacing the internal USB key
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To avoid interference with other components in the server module, the maximum
permissible dimensions of the USB key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
1. Ensure that you read the
2. Follow the procedure listed in
Steps
1. Locate the USB connector/USB key.
2. If installed, remove the USB key.
3. Insert the new USB memory key into the USB connector.
Figure 15. Replacing the USB memory key
1. USB memory key
Next steps
1. Follow the procedure listed in
2. Enter the System Setup and ensure that the USB key is detected by the system.
62
Safety instructions.
Before working inside your
After working inside your
system.
2. USB memory key connector
system.