Documentation Matrix - Dell PowerEdge M830 Owner's Manual

Convention iDRAC Direct
LED indicator
pattern
A Steady green
B Flashing green
C Green and turns
off
D Turn off
The table below displays iDRAC Direct activity when configuring iDRAC Direct using your laptop and
cable (Laptop Connect).
iDRAC Direct LED
indicator pattern
Steady green for two
seconds
Flashing green (on
for two seconds and
off for two seconds)
Turns off

Documentation matrix

The documentation matrix provides information about documents that you can refer to, for setting up
and managing your system.
To...
Set up your system and know the system technical
specifications
Install the operating system
Get an overview of the Dell Systems Management
offerings
Configure and log in to iDRAC, set up managed
and management system, know the iDRAC
features, and troubleshoot using iDRAC
Know about the RACADM subcommands and
supported RACADM interfaces
Start, enable, and disable Lifecycle Controller,
know the features, use, and troubleshoot Lifecycle
Controller
12
Condition
Lights green for a minimum of 2 seconds at the beginning and end
of a file transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
Indicates that the USB is ready to be removed or that a task is
complete.
Condition
Indicates that the system is connected.
Indicates that the system connected is recognized.
Indicates that the system is unplugged.
Refer to...
Getting Started With Your System
Operating system documentation at dell.com/
operatingsystemmanuals
Dell OpenManage Systems Management Overview
Guide at dell.com/openmanagemanuals
Integrated Dell Remote Access Controller User's
Guide at dell.com/esmmanuals
RACADM Command Line Reference Guide for
iDRAC and CMC at dell.com/esmmanuals
Dell Lifecycle Controller User's Guide at dell.com/
esmmanuals