Wake Up Events - JETWAY J7F4-F User Manual

3-8-1 Wake Up Events

VGA
LPT&COM
HDD&FDD
PCI Master
Wake-Up on Ring/LAN
Wake-Up on PCI PME
PS2KB Wakeup Selection
Wake-up on hot key(PS2KB)
Wake-up on USB Devices
Wake-Up on RTC Alarm
Date Of Month Alarm
Time (hh:mm::ss) Alarm
> IRQS Activities
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Wake Up by PCI PME
This will enable the system to wake up to PCI LAN Card.
The settings are: Enabled and Disabled.
Power On by Ring/LAN
During Disabled, the system will ignore any incoming call from the modem/LAN. During
Enabled, the system will boot up if there's an incoming call from the modem/LAN.
Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
Phoenix – AwardBIOS CMOS Setup Utility
Wake Up Events
Off
LPT/COM
ON
OFF
Disabled
Disabled
Hot Key
Disabled
Disabled
Disabled
Disabled
Disabled
Press Enter
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
28
Item Help
F1:General Help