Pc Health Status; Miscellaneous Control - JETWAY J7F4-F User Manual

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
Shutdown Temperature
Current Thermal-Throttling
Current Thermal-Throttling Temp
Current Thermal-Throttling Duty
Current Thermal-Throttling Beep
Show PC Healthy in Post
Vcore
VDIMM
+3.3V
+5V
+12V
3VSB
VBat
5VSB
CPU Temperature
System Temperature
CPUFAN
SFAN1
SFAN2
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Current FAN1, FAN2 Speed/CPU Vcore/3.3V/+12V/Internal VCC
This will show the CPU/FAN/System voltage chart and FAN Speed.

3-11 Miscellaneous Control

This section is for setting CPU Miscellaneous Control.
Auto Detect PCI Clock
Spread Spectrum
** Current Host Clock
Host Clock at Next Boot
** Current DRAM CLOCK
DRAM Clock at Next Boot
VDIMM Select
VAGP Select
Flash Part Write Protect
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
CPU Clock Ratio
This item allows you to select the CPU ratio.
Auto Detect PCI/DIMM Clock
This item allows you to enable/disable auto detect PCI/DIMM Clock.
The settings are: Enabled, Disabled.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Disabled
Disabled
70
50.00%
Enabled
Enabled
1.07V
1.90V
3.26V
5.00V
11.96V
3.33V
3.28V
4.91V
48/118F
35/95F
6849RPM
0RPM
0RPM
F6:Optimized Defaults F7:Standard Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Enabled
Disabled
100MHZ
100MHZ
266MHz **
266MHz(By SPD)
1.90V(Default)
1.55V(Default)
Disabled
F6:Optimized Defaults F7:Standard Defaults
Menu Level >
Menu Level >
30
Item Help
F1:General Help
Item Help
F1:General Help