Pm Wake Up Events - JETWAY J-630AF User Manual

Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.
PM Wake-Up Events
Please refer to section 3-8-1

3-8-1 PM Wake up Events

CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
IRQ [3-7,9-15],NMI
IRQ 8 Break Suspend
Ring Power Up Control
PCIPME Power Up Control
KB Power ON Password
Power Up by Alarm
x Month Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Ring Power Up Control
During Disabled, the system will ignore any incoming call from the modem. During Enabled,
the system will boot up if there's an incoming call from the modem.
PCIPME Power Up Control
This will enable the system to wake up by PCI device Power Management function.
The settings are: Enabled and Disabled.
KB Power ON Password
This item can setting Power On Password, if you Enabled keyboard Power On function then
you can Power On system by key-in the password which you setting.
Power Up by Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
PM Wake Up Events
Enabled
Disabled
Disabled
Disabled
Enter
Disabled
NA
0
0 : 0 : 0
F6:Optimized Defaults F7:Standard Defaults
36
Item Help
Menu Level >>
F1:General Help