Wake Up Events - JETWAY 627FWE User Manual

3-8-1 Wake Up Events

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
VGA
LPT&COM
HDD&FDD
PCI Master
Wake-Up on Ring/LAN
Wake-Up on PCI PME
PS2KB Wakeup Selection
PS2KB Wakeup from S1-S5
Wake-Up on RTC Alarm
x Date of Month Alarm
x Time (hh:mm:ss)
IRQS Activities
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Wake Up by PCI PME
This will enable the system to wake up to PCI LAN Card.
The settings are: Enabled and Disabled.
Power On by Ring/LAN
During Disabled, the system will ignore any incoming call from the modem/LAN. During
Enabled, the system will boot up if there's an incoming call from the modem/LAN.
Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
Wake Up Events
Off
LPT/COM
ON
OFF
Disabled
Disabled
Hot Key
Disabled
Disabled
0
0:0:0
Press Enter
F6:Optimized Defaults
31
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults