1. RADAR OPERATION
Description of function key programs (con't from previous page)
Item
[TT•AIS]
DISP TT
DISP AIS
TARGET DATA & ACQ
PAST POSN INTERVAL
REF MARK
CPA LIMIT
CPA
TCPA
AZ1
AZ2
TARGET LIST SORT
TRIAL MANEUVER
ASSOCATION
AIS MESSAGE
TRIAL MODE CHANGE
AIS SCALED SYMBOL
[OPERATION]
ECHO COLOR
BACK COLOR
RING
TARGET ALARM1
TARGET ALARM2
WATCH ALARM RESET
ZOOM
MARK DELETE
OWN TRACK DELETE
TGT TRACK DELETE
CHART ALIGN
DISPLAY SELECT
RADAR COMBINE*
MOB
USER DEFAULT
TLL
ANCHOR WATCH
COLOR SHIFT
ICON DISP
1-72
Activates/deactivates TT.
Activates/deactivates AIS.
TT: Acquires target; shows data for tracked target selected.
AIS: Activates sleeping AIS target; shows data for AIS target
selected.
Selects past position plotting interval.
Inscribes reference mark (for target-based speed).
Turns CPA limit on/off.
Enters CPA range.
Enters TCPA time.
Sets Acquisition Zone 1.
Sets Acquisition Zone 2.
Sorts target list.
Executes trial maneuver.
Changes indication in Association Usage box. See 4.13.
Displays AIS message board.
Switches between dynamic and static modes.
Scales AIS target symbols according to target (ship) size.
Selects echo color.
Selects background color.
Turns range rings on/off.
Sets no. 1 target alarm.
Sets no. 2 target alarm.
Resets watch alarm.
Enables zoom.
Deletes mark (origin mark, waypoint mark, plotter mark).
Deletes own ship's tracks according to setting of OWN TRACK
menu (see page 5-15).
Deletes other ship's tracks according to setting of TARGET TRACK
menu (see page 5-15).
Aligns chart with radar picture.
Selects display mode.
Dual-radar display. *Non-IMO only
Inscribes MOB mark.
Restores user defaults for [F1]-[F3].
For F-KEY:
1.
Set equipment as desired.
2.
Long-push (more then 1 s) function key registered as USER
DEFAULT.
3.
To recall a setting, do step 2. The radar is then set to stand-by
and "USER DEFAULT" appears at the bottom-right corner.
For STORE:
1.
Set equipment as desired.
2.
Select STORE at 2 USER DEFAULT BACKUP from page (2/2)
of the OPERATION menu. Select HOLD to register settings.
3.
To recall setting, press the function key registered as USER
DEFAULT. The radar is then set to stand-by and "USER
DEFAULT" appears at the bottom-right corner.
Target latitude and longitude output (to chart plotter).
Enables the anchor watch alarm.
Paint own ship's tracks in different colors.
Hides and shows boxes outside the effective display area.
Description