Own Ship Symbol - Furuno FAR-2107 Operator's Manual

1.34.4

Own ship symbol

The own ship symbol marks own position on the display. It can be turned on or
off and its configuration selected from the MARK menu. Two configurations are
available: minimized symbol and scaled symbol. If the largest dimension of the
symbol gets smaller than 3 mm, the symbol will disappear and the own ship
mark will be shown as a minimized symbol. The scaled symbol is scaled to
indicate the length and beam of the vessel. Ship's dimensions should be entered
at installation to use the scaled ship symbol.
Antenna
position
1. Left-click the MENU box to open the menu.
2. Select 2 to show the MARK MENU.
3. Select OFF, MIN or SCALED as appropriate.
4. Push the right button twice to close the menu.
Heading line
X
Beam line
Scaled symbol
1. RADAR OPERATION
Heading line
Beam line
Minimized symbol
1-61