Video Plotter Operation; General; Display Modes - Furuno FAR-2107 Operator's Manual

5.

VIDEO PLOTTER OPERATION

5.1

General

The video plotter does the following functions:
• Plots own and other ships' tracks. (Plotting of other ships' tracks not available on IMO
type.)
• Enters waypoints, nav lines and marks.
• Creates and displays radar maps.
• Records data onto memory cards (optional card interface required).
• It uses two types of memory cards, a memory card (RAM card) for storing own ship and
other ship's tracks and marks, and a digital chart card (ROM card).
• 30 nav lines may be stored and each line may contain up to 30 waypoints. One nav line
may be shown on the display. 200 waypoints are available. Own ship and other ship
tracks may be stored at a selected interval.
• Charts (A, B, C and W types) are superimposed on the radar picture without disturbing
the radar observation. The chart area is dependent on the radar range in use.
5.2

Display Modes

This radar has display modes as follows.
• IMO, A type:
• B, C, W type:
Use the DISPLAY MODE box to select a mode. (When the video plotter mode is
displayed more than five seconds, the radar automatically goes into standby.)
Note 1: Display mode cannot be selected when the menu is open. Close the
menu to select a display mode.
Note 2: IMO type radar can display own ship's track and L/L grid on the
+PLOTTER display.
Note 3: The anchor watch, as well as AIS, is active in standby.
Radar, Radar + Plotter, Anchor Watch
Radar, Radar + Plotter, Plotter
5-1