Furuno FAR-2107 Operator's Manual page 126

1. RADAR OPERATION
Markers, measurements and reference point (con't)
Category
Bearing cursor
Course, speed
CPA, TCPA
BCR, BCT
Own ship data
Note: When the antenna is located some distance from the CCRP, the CCRP
may be outside the bearing cursor in true motion or offcenter.
Also, when the CCRP is set as reference point, some parts of the bearing
cursor are not displayed.
1-102
Item
Heading
Speed
Course over ground
Speed over ground
Own L/L
Reference point
CCRP
Drawn with Drawn with
CCRP at center antenna position at
center
Calculated with Calculated with
CCRP at center antenna position at
center
Calculated with Calculated with
CCRP at center antenna position at
center
Calculated from bow position
Data from sensor, regardless of
reference point selected
Antenna position