Brilliance Of Screen Data - Furuno FAR-2107 Operator's Manual

1. RADAR OPERATION
1.39

Brilliance of Screen Data

You can adjust relative brilliance levels of various markers and alphanumeric
readouts displayed on the screen.
1. Right-click the BRILL box at the bottom left corner of the screen to show the
BRILL menu.
[BRILL1 MENU (1/2)]
1 ECHO COLOR
YEL/GRN/
WHT/COLOR*
2 PALETTE
DAY-GRY/DAY-BLU/
DUSK-GRY/DUSK-BLU/
NIGHT-GRY/NIGHT-BLU/
3 PANEL DIMMER
4 CHARACTER
5 CURSOR
6 ECHO
7 TRAIL
8 HL
9 RING
0 NEXT
2. Select item you wish to adjust. (To go to the second page of the BRILL menu
select 0 NEXT and push the scrollwheel.)
Item
1 ECHO COLOR
2 PALETTE
3 PANEL
DIMMER
4 CHARACTER
5 CURSOR
6 ECHO
7 TRAIL
8 HL
9 RING
3. Roll the scrollwheel to set brilliance level. The range of adjustment for items
except "HL" and "CURSOR" is 0-100%. The range of adjustment for HL and
CURSOR is 50-100%.
4. Push the right button once or twice to close the menu.
1-76
* Not available
on IMO or A type
Choose 0 NEXT
to show page 2
of the BRILL menu.
Note: Four brilliance and color sets are
provided. For further details see
section 1.49.
BRILL menu
Page 1
Adjusts
brilliance of;
See section 1.49.
See section 1.49.
Backlighting of
control unit
All alphanumeric
characters
Cursor (+) and
arrow
Radar echoes
Target trails
Heading line
Range rings
[BRILL1 MENU (2/2)]
1 BACK
2 BRG CURSOR
3 EBL
4 VRM
5 PI LINE
6 TT SYMBOL
7 AIS SYMBOL
8 L/L GRID
9 MARK
0 CHART*
Page 2
Item
2 BRG CURSOR
3 EBL
4 VRM
5 PI LINE
6 TT SYMBOL
7 AIS SYMBOL
8 L/L
9 MARK
0 CHART
Adjusts
brilliance of;
Bearing cursor
EBLs
VRMs
PI lines
TT symbols
AIS symbols
Chart grid
All marks
Chart