Special Mode; Special Mode Configuration Buttons - Denon AVR-X3100W Service Manual

SPECIAL MODE

Special Mode Configuration Buttons

No. 1 - 13 : Hold down buttons A, B and C at the same time and press the power button to turn on the power.
b
No. 14 ： Press the A and B buttons simultaneously while inserting the AC plug to turn the power on.
b
No. Mode
Version Display
1
(u-COM / DSP Error Display)
2 Protection History Display Mode
Check the Video/Audio pass
3
Mode
4 Remote ID Setup Mode
5 TUNER step
6 Operation INFO
User Initialization mode
7 (Settings for the Installer Setup are
not initialized.)
Factory Initialization mode
8 (Initialization includes settings for the
Installer Setup.)
Mode for preventing remote
9
control acceptance
PANEL LOCK mode
10
(with Volume)
PANEL LOCK mode
11
(without Volume)
12 Panel Lock Release
13 Protection pass mode
14 Forced USB All Device Write Mode
SOURCE SELECT
Button A Button B Button C
DIMMER STATUS
ZONE2
DIMMER
SOURCE
↑ ↑
↑ ↑
↑ ↑
↑ ↑
TUNER TUNER
PRESET PRESET
CH - CH +
ZONE2
DIMMER
SOURCE
TUNER
ZONE2
PRESET
SOURCE
CH +
↑ ↑
↑ ↑
↑ ↑
TUNER
ZONE2
PRESET
SOURCE
CH +
TUNER
PRESET STATUS
CH -
TUNER ZONE2 ZONE2
PRESET CH ON/OFF SOURCE
PHONES
TUNER ZONE2
X
PRESET CH - SOURCE
TUNER
PRESET CH +
Displays the version of firmware such as the main firm-
- ware or DSP, etc. Errors that have occurred are displayed.
(See 20 page)
Displays the protection occurrence history.
STATUS
(See 60 page)
This is a special mode for service confirmation used dur-
ing repair work to simplify the confirmation work for the
↑
Audio channel/video channel.
(See 28 page)
If there are multiple DENON AV receivers in the same area,
this mode stops the other AV receivers from being oper-
↑
ated concurrently with this device.
(See 64 page)
Enables reception STEP of the ANALOG TUNER to be
↑ changed.
(See 63 page)
Displays the total operating time of the set, number of
times the power was switched on, and number of occur-
↑
rences of each protection.
(See 62 page)
Initializes backup data.
-
(Settings for the Installer Setup are not initialized.)
Initializes backup data.
-
(Initialization includes settings for the Installer Setup.)
Start this unit in the PANEL/REMOTE LOCK selection mode
- so that PANEL LOCK and Remote Lock can be selected as
ON or OFF. (See
This function prevents reception of all keys/encoders
- (including VOLUME) other than the power supply button
on the Front Panel.
This function prevents reception of all keys/encoders
- other than the power supply button and VOLUME encoder
on the Front Panel.
- Function for Releasing the PANEL LOCK
Enables the power to be turned on when protection de-
STATUS tection is in the stopped state.
(See 65 page)
Mode used when this unit cannot be recovered.
- Forcibly switches this unit to USB update mode.
(See 72 page)
1 2 3 MEDIA 4
DIMMER S T A T U S CB L /S A T Blu-ray ONLINE
PLAYER
QUICK SELECT
AUX 1 - HDMI SETUP MIC
STATUS
DIMMER
19
Contents
24 page)
MASTER VOLUME