Genie GS-1530 Operator's Manual page 29

Second Edition • Fifth Printing
Observe and Obey:
Only qualified riggers should rig and lift the
machine.
Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See serial label.
Lifting Instructions
Fully lower the platform. Be sure the extension
deck, controls and component trays are secure.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are two
1 inch / 2.5 cm holes on the front of the machine
and two holes in the ladder for lifting.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Part No. 82660 Genie GS-1530 and GS-1930 and GS-1532 and GS-1932
TRANSPORT AND LIFTING INSTRUCTIONS
Center of gravity
GS-1530 and GS-1532
GS-1930 and GS-1932
Y Axis
X Axis
Operator's Manual
X Axis Y Axis
49.8 cm 47.2 cm
50.8 cm 49.5 cm
27