Genie GS-1530 Operator's Manual page 24

Operator's Manual
OPERATING INSTRUCTIONS
Error Indicator Light On
If the error indicator light is on, push
in and pull out the red Emergency
Stop button to reset the system.
If the light stays on, tag and remove the machine
from service.
Error Indicator Light Flashing
If the error indicator light is flashing,
the platform is overloaded and no
functions will operate. An alarm will
sound at the platform controls.
Push in and pull out the red Emergency Stop
button. The error indicator light will be off.
Remove weight from the platform. If the platform is
still overloaded, the light will flash again.
To Extend and Retract Platform
1 Step on the platform extension release pedal on
the platform toeboard.
2 Grasp the platform guard rails carefully and push
to extend the platform to the mid-position stop.
3 Step on the release pedal again and push to
fully extend the platform.
Do not stand on the platform extension while trying
to extend it.
4 Step on the platform extension release pedal
and pull to retract the platform to the mid-
position stop. Step again to fully retract the
platform.
22 Genie GS-1530 and GS-1930 and GS-1532 and GS-1932
Second Edition • Fifth Printing
Operation From Ground with
Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Lower the platform.
3 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4 Chock the wheels.
5 Charge the batteries.
Part No. 82660